TA儀器TA Instruments DMA Q800動態(tài)熱分析儀 相關(guān)配件及耗材 

DMA Q800 Accessories

985700.901

DMA-RH (Relative Humidity) Accessory for DMA Q800

991400.902

Gas Cooling Accessory - Auto Tank Fill (for cooling to -150 °C)

984350.901

Air Compressor Accessory (for use with DMA Q800 only)

985011.901

Accessory Kit, DMA Q800 (supplied with the DMA Q800 module)

405001.901

ACS-2 Air Chiller System (220-230VAC; 60Hz)

Note: Requires Q800 DMA Air Chiller Panel (P/N: 986300.901) for operation.

405001.902

ACS-2 Air Chiller System (220-230VAC; 50Hz)

Note: Requires Q800 DMA Air Chiller Panel (P/N: 986300.901) for operation.

405000.901

ACS-3 Air Chiller System (220-230VAC; 60Hz)

Note: Requires Q800 DMA Air Chiller Panel (P/N: 986300.901) for operation.

405000.902

ACS-3 Air Chiller System (220-230VAC; 50Hz)

Note: Requires Q800 DMA Air Chiller Panel (P/N: 986300.901) for operation.

986300.901

Q800 DMA Air Chiller Panel (for use with ACS-2 and ACS-3 Air Chiller Systems)

986310.901

Nitrogen Purge Cooler

DMA Q800 Clamp Kits

984048.901

8 mm Single/Dual Cantilever Clamp Kit

984047.901

20 mm Single/Dual Cantilever Clamp Kit

984015.901

35 mm Single/Dual Cantilever Clamp Kit (supplied with DMA Q800 module)

984026.901

3-point Bending Clamp Kit (5, 10, and 15 mm lengths)

984014.901

3-point Bending Clamp Kit (20 and 50 mm lengths)

985178.901

Submersion 3-point Bending Kit (5, 10, and 15 mm lengths)

984018.901

Parallel Plate Compression Clamp Kit (includes 15 and 40 mm plates)

984022.901

Penetration Clamp Kit

985016.901

Film/Fiber Tension Clamp Kit

984023.901

Specialty Fiber Tension Clamp Kit

984017.901

Shear Sandwich Clamp Kit

985067.901

Submersion Compression Clamp Kit

985068.901

Submersion Film/Fiber Tension Clamp Kit

985069.901

3-point Bending Clamp Kit (50 mm, low friction)

985070.901

3-point Bending Clamp Kit (20 mm, low friction)

984486.901

Film Cutting Kit

985164.901

Powder Kit (for use with 35 mm Cantilever Clamp Kit P/N: 984015.901)

985018.901

DMA-RH Accessory Clamp Kit for DMA Q800: specifically for use with the DMA-RH accessory - kit includes clamp components for 10 mm 3-pt bending, penetration, and 15 mm compression clamps.

DMA Q800 Replacement Parts

259508.000

Brass Tweezers

270962.002

Telescoping Gauge (for 17 mm single cantilever clamps)

985199.901

Control Thermocouple (90 mm length)

985199.902

Sample Thermocouple (130 mm length)

984370.901

Furnace Inlet Ferrule/Spring Kit (pkg. of 5)

270976.002

Filter/Regulator with Auto Drain

270975.001

Filter Replacement, Auto Drain Regulator

985078.001

Dual Cantilever Clamp Screen

985078.002

Film/Fiber Tension Clamp Screen

985052.901

Thermocouple Baffle

DMA Q800 Calibration and Test Materials

900902.901

Indium Temperature Calibration Sample

900907.901

Zinc Temperature Calibration Sample

984310.901

Indium Wire, Film/Fiber Temperature Calibration (pkg. of 10 pieces, 38 mm length)

980228.902

Glass Support Cloth (0.2 mm thick, 33 m length)

982161.902

ABS Sample (3.18 mm thick, 61 mm length) (pkg. of 5)

982161.903

ABS Sample (3.18 mm thick, 36 mm length) (pkg. of 5)

982165.903

Polycarbonate Sample (1.6 mm thick, 36 mm length) (pkg. of 5)

982165.904

Polycarbonate Sample (0.79 mm thick, 36 mm length) (pkg. of 5)

984309.901

Polyethylene Terephthalate (PET) Film (38 mm length) (pkg. of 10)

984313.901

PET Fiber (910 mm length)

984308.001

DMA Calibration Standard 0.005 inch thick

984308.002

DMA Calibration Standard 0.010 inch thick

984308.003

DMA Calibration Standard 0.020 inch thick

984308.004

DMA Calibration Standard 0.030 inch thick

982166.003

Compliance Sample - Dual Cantilever

982166.004

Compliance Sample - Single Cantilever

984331.901

Film/Fiber Tension Clamp Calibration Kit

TA儀器TA Instruments DMA Q800動態(tài)熱分析儀 相關(guān)配件及耗材